Pool Sand Filters
Sand filters in fiberglass, laminated polyester and one-piece molded bodies. Side and top mount options from 300 mm to 920 mm, with matching 6-way multiport valves.
Manufactured by COREX Pool Products, Spain7 Pool Sand Filters families
MICRON
Sand Filter
View product
EURO
Sand Filter
View product
BOBBIN-S
Side Mounted Sand Filter
View product
BOBBIN-T
Top Mounted Sand Filter
View product
PRO-MOLDED
Sand Filter
View product
PRO-Molded
Top Mounted Sand Filter
View product
Multiport Valve
Product Overview & Model Specifications
View productPool Sand Filters: models and key specs
| Product | Model codes | Key specs | Datasheet |
|---|---|---|---|
| MICRON | CX-10101 to CX-10104 | Flow rate: 10 to 32 m³/h · Sand load: 75 to 450 kg · Working pressure: 2.5 kg/cm² | |
| EURO | CX-10201 to CX-10204 | Flow rate: 10 to 30 m³/h · Sand load: 75 to 450 kg · Test pressure: 3 bar | |
| BOBBIN-S | CX-10501 to CX-10503 | Flow rate: 8 to 24 m³/h · Sand load: 75 to 410 kg · Max pressure: 2.5 to 3 kg/cm² | |
| BOBBIN-T | CX-10401 to CX-10403 | Flow rate: 6 to 14 m³/h · Sand load: 50 to 150 kg · Max pressure: 2.5 kg/cm² | |
| PRO-MOLDED | CX-10301 to CX-10305 | Flow rate: 2.1 to 14 m³/h · Sand load: 20 to 100 kg · Operating pressure: 2.0 kg/cm² | |
| PRO-Molded | CX-10306 to CX-10309 | Tank range: 300 to 600 mm · Sand load: 35 to 150 kg · Connection: 1.5" | |
| Multiport Valve | CX-10206 to CX-10209 | Sizes: 1.5" / 2" / 3" / 4" · Rated pressure: 3.5 bar (1.5" to 3") · Testing: DIN 3230 |
Data from the COREX Catalogue 2027 datasheets. Manufactured by COREX Pool Products, Spain.
Size the equipment for a project
Type the pool size. Neelo suggests the pump, filter and number of lights, with litres of water and hourly flow.
- 1Type the pool size
- 2See the kit
- 3Send a trade enquiry
Pool Sand Filters: common questions
How much sand does a pool filter need?
It depends on the filter size. MICRON takes 75 to 450 kg. EURO takes 75 to 450 kg. BOBBIN-S takes 75 to 410 kg. BOBBIN-T takes 50 to 150 kg. PRO-MOLDED takes 20 to 100 kg, and PRO-Molded top mount takes 35 to 150 kg. Each datasheet lists the exact load per model.
How often should you change the sand in a pool filter?
The PRO-Molded datasheet gives a typical sand replacement of every 5 to 7 years. Backwashing cleans the sand bed between changes.
How do you backwash a sand filter?
Turn the 6-way multiport valve to Backwash. The six positions are Filter, Backwash, Rinse, Recirculate, Waste and Close. The pressure gauge on the filter shows when backwashing is needed.
Side mount or top mount sand filter?
Side mounted: MICRON, EURO, BOBBIN-S and PRO-MOLDED. Top mounted: BOBBIN-T and PRO-Molded top mount. Top mount filters are compact for small pools and spas.
Guides for pool sand filters
Choosing equipmentHow to choose the right pool pump
Choose a pump around the water flow your pool needs, the pipework and the filter.
Read guide →
Choosing equipmentChoosing a pool pump and sand filter together
The pump moves the water and the filter removes particles.
Read guide →
Choosing equipmentChoosing equipment for a small residential pool
A small pool still needs a properly matched circulation system.
Read guide →
Choosing equipmentPool equipment checklist for a new project
Use the pool plan to identify the equipment, dimensions and documents to confirm before requesting a quotation.
Read guide →All Filters datasheets
Download the catalogue volume or each product datasheet as a PDF.