Buyer questions

Pick the pump by the flow the pool needs. Marathon Max gives 16.4, 23.0 or 35.0 m³/h at 1, 2 or 3 HP. Max-Flow covers 1.0 to 3.0 HP. Slient Swim gives 255 to 390 l/min at 0.75 to 1.5 HP. For public and commercial pools, Power Plus runs from 5.5 to 25 HP. Send us the pool size and we will match the model code.

Marathon Max and Max-Flow come in both single phase and three phase. Power Plus is three phase. Slient Swim runs on 220 to 240 V, 50 Hz.

Marathon Max has an optional 316SS shaft for saltwater pools. Slient Swim is made for fresh and saltwater pools.

Thunder Series is a high-flow pump for hydro-massage tubs, whirlpools and concrete jacuzzis. Cyclone Series is for spas and counter-current systems. The AP Series air blower drives spa nozzles and hydro-massage baths.

It depends on the filter size. MICRON takes 75 to 450 kg. EURO takes 75 to 450 kg. BOBBIN-S takes 75 to 410 kg. BOBBIN-T takes 50 to 150 kg. PRO-MOLDED takes 20 to 100 kg, and PRO-Molded top mount takes 35 to 150 kg. Each datasheet lists the exact load per model.

The PRO-Molded datasheet gives a typical sand replacement of every 5 to 7 years. Backwashing cleans the sand bed between changes.

Turn the 6-way multiport valve to Backwash. The six positions are Filter, Backwash, Rinse, Recirculate, Waste and Close. The pressure gauge on the filter shows when backwashing is needed.

Side mounted: MICRON, EURO, BOBBIN-S and PRO-MOLDED. Top mounted: BOBBIN-T and PRO-Molded top mount. Top mount filters are compact for small pools and spas.

LED lights use much less energy than halogen and are kinder to the environment. COREX Beam LED lamps are rated for 30,000 hours. The 602B halogen light uses a 75 to 100 W lamp.

Yes. COREX LED and halogen wall lights fit existing pools without an installation niche. They fix straight to the wall with a reinforced plastic cross, anchor plugs and screws.

COREX wall lights have a patented locking system for easy lamp substitution. For PAR56 niches, Beam Lights are LED replacement lamps with 144 or 252 LEDs.

LED lights come in cool white, warm white and RGB. SMD lights add 16 colour programs with synchronisation, and an RGB-DMX model.

All COREX skimmers hold 17 litres. Wide mouth skimmers (CX-40108, CX-40110) suit commercial and large residential pools. The standard skimmer (CX-40109) and the round cover standard throat skimmer suit medium-sized and residential pools.

The square main drain CX-40115 handles 850 L/min. The 8-inch main drain CX-40117 handles 558 L/min with a 2 inch BSP outlet. Round drain covers handle 558 L/min (7 x 7 inch) and 710 L/min (9 x 9 inch).

The return wall inlet and suction vacuum come with a 2 inch thread (CX-40101, CX-40102) or as glue-fit for 63 mm pipe (CX-40103, CX-40104).

Float racing lanes come in 120 mm and 150 mm diameter, in 25 m length (CX-4026, CX-4024).

Standard, Wall and Mix ladders come with 2, 3, 4 or 5 steps. Overflow ladders come with 2, 3 or 4 steps. Each datasheet gives Size A and Size B for every model so you can match the pool depth.

All ladders are AISI 304 stainless steel. A 316SS option is available for saltwater pools.

LUXE models have anti-slip steps. Frame, tube and sizes are the same.

Choose the Overflow or LUXE-Overflow handrail ladder.

The CX-MT-50 maintenance kit has the basics: vacuum hose, leaf skimmer, leaf rake, pH test kit, wall brush, flexible vacuum head and aluminium pole.

Choose by width and surface. 14 inch flexible head for everyday cleaning. 18 inch aluminium head with bottom brush. 19 inch head with brushes for floors and walls. 22 inch commercial head with side brushes for tiled, marble and concrete pools.

The 18 inch deluxe wall brush has dense nylon bristles for algae, stains and calcium. The 10 inch stainless steel brush is for heavy algae and calcium on concrete and gunite pools.

The basic pH and CL test kit checks pH and chlorine with two 15 ml reagent bottles. Test kit refills keep it going.

Match the heater to your room size. VEGA 4.5 kW for 3 to 6 m³. 6 kW for 5 to 8 m³. 8 kW for 7 to 12 m³. 9 kW for 8 to 14 m³. VEGA Pro 10.5 kW for 9 to 15 m³, 13.5 kW for 11 to 20 m³ and 16.5 kW for 16 to 30 m³.

Each set includes the steam generator, control panel, temperature sensor and one steam nozzle. CX-40 is 4 kW, CX-60 is 6 kW and CX-90 is 9 kW.

The datasheet has a room-size table for light walls, tiled walls and stone walls. If the cubicle is not square, allow 0.5 kW for masonry and 0.25 kW for plastic per square metre of surface.

Flow grows with length: 17 gpm for 300 mm, 34 gpm for 600 mm, 50 gpm for 900 mm and 67 gpm for 1200 mm. All models use a 1.5 inch connection.

Both come in 300, 600, 900 and 1200 mm with bottom or rear inlet. Stainless steel models are 115 mm wide. Acrylic models are 195 mm wide.

Yes. Fibre-optic lighting kits fit all water blade models, with colours set by remote control.

Yes. For new installations, stainless steel supports are required. CXDV-12 fits the 6 foot board and CXDV-15 fits the 10 foot board.

No. Baja diving boards are not suitable for use as a spring board.

Follow the SPATA guidelines and keep the Cage of Safety: an area of water deep and large enough in the deep end for safe deck-level diving.

Choose by total light power. CX-50128 is 50 W, CX-50129 is 100 W and CX-50130 is 300 W. All take a 220 to 240 V input.

The deck box CX-50131 is a junction box for underwater light connections.